Landscaping & Outdoor
Rockery Stone Calculator
Calculates landscape boulders or rockery stones by tonnage
Updated May 13, 2026 · Live
What this tool does
Calculates landscape boulders or rockery stones by tonnage.
Formula Used
People also use
How the rockery stone calculator works
Calculates landscape boulders or rockery stones by tonnage. The calculator takes your dimensions and supplier rates, applies a standard US construction formula, and returns a quantity with an indicative cost. Every figure is an estimate — site conditions always move the final number.
Typical US landscaping and outdoor wastage
Aggregates settle when compacted — add 5–10% to the loose volume ordered. Sod shrinks ~5% on delivery as it dries before laying. Our defaults reflect common US trade allowances, and can be adjusted upwards for non-standard geometry or downwards where experience supports a lower figure.
What this tool does not do
It does not replace a professional quote, factor regional pricing, assess structural adequacy, or confirm building code compliance. Those remain the responsibility of a suitably qualified designer, engineer, or your local building official.
On-site considerations for rockery stone
Impervious surfaces over a threshold (varies by municipality, often 10–25% of lot area) trigger stormwater management requirements. Check with your local building department before paving large areas.
Codes and compliance
Outdoor structures (sheds, pergolas, decks) over 200 ft² typically need a permit. Setback rules from property lines vary by zoning district — verify before building. When in doubt, file a pre-application question with your local building department — early clarity is cheaper than a corrective inspection.
Before you order
Order bulk aggregates by the cubic yard delivered, not in bags — the labor savings recover the small premium quickly. Cross-checking the calculator’s output against a supplier quote helps catch differences in pricing assumptions — ask for exact product specifications (grade, finish, batch number) and confirm delivery timescales against your programme.
Adjusting the defaults
Every input in this calculator is editable. Enter your own dimensions, supplier prices, and wastage allowance — the output recalculates instantly. If the defaults feel off for your region or project type, your own numbers always override them.
Using this rockery stone calculator alongside other BuildMetricLab tools
This calculator works best as part of a planning workflow. Pair the quantity with our project contingency, labor-hours, and material-cost calculators to build a complete estimate before you pick up the phone to a supplier. All BuildMetricLab tools run entirely in your browser — no sign-up, no data sent anywhere, and every formula is shown on-page so you can audit the math.
Sources & methodology
This tool estimates the tonnage and cost of rockery or landscape stone needed to fill a defined area. Volume is calculated as area (sq ft) multiplied by intended depth (ft), then converted to weight in US tons using a per-cubic-foot density value for the selected stone type — common defaults range from roughly 135 lb/ft³ for sandstone to 168 lb/ft³ for granite. Total cost is derived by multiplying the estimated tonnage by a user-supplied price per ton.
Frequently asked questions
Are rockery stone calculator results accurate enough to order materials?
Use them as a starting estimate only. Verifying the final quantity with your supplier or contractor before ordering is good practice — site conditions, wastage and cut-offs all affect the true figure.
What wastage percentage should I use?
The calculator defaults to the typical US trade allowance for landscaping & outdoor. Increase it for complex cuts, awkward shapes, or first-time DIY. The default wastage allowance reflects common trade practice; values lower than the default may underestimate offcuts.
Does this replace professional advice?
No. This tool is a planning estimator. For work that affects structure, building code compliance, gas, electrical, plumbing, or drainage to a public sewer, consult a licensed contractor or design professional.
Can I change the unit prices?
Yes — every price field is editable. Plug in your supplier's quote to get a total that matches your project.
Related tools
Calculators from other categories that planners often reach for next.